|
Back to TCAD Home
|
Synopsys/ Former ISE provides this information based on experience with internal installations and customer reports. Depending on a specific installation, additional patches may be required.
| Synopsys/ Former ISE TCAD for Sun |
| Required operating system patches for Sun Solaris Ensure that the following operating system patches (or later revisions) for Sun Solaris are installed. These free patches are available from Sun Microsystems. SunOS 5.7: Shared library patch for 64-bit C++
Patch: 106300-17 SunOS 5.7: Shared library patch for C++
Patch: 106327-16 SunOS 5.8: Shared library patch for C++
Patch: 108434-13 SunOS 5.8: Shared library patch for 64-bit C++
Patch: 108435-13 |
|
|
| Synopsys/ Former ISE TCAD for Windows |
Command shell
ISE recommends using the Windows command shell. ISE does not, in general, test its tools for use in other shells.Cygwin: A UNIX environment for Windows
Cygwin from Red Hat is part of ISE TCAD for Windows. This distributed Cygwin version corresponds to the version posted on the internet by Red Hat in January 2003. ISE has verified that this Cygwin version works properly with ISE TCAD tools. Red Hat does not assign version numbers to Cygwin, but supports continual updates through the internet. ISE does not recommend the use of the update feature, because ISE cannot guarantee that all ISE TCAD tools will work properly with updated Cygwin versions. If you update Cygwin and experience problems that you wish to report, note all of the components that have been updated and differ from the Cygwin libraries distributed on the ISE TCAD CD-ROM.
|
|
|
| Synopsys/ Former ISE TCAD for IBM |
Required operating system patches for AIX 5.1
ISE TCAD Release 9.5 requires a C++ run-time library. The minimum version of the C++ run-time is xlC.aix.50.rte 6.0.0.8 for AIX 5.1. |
|
|
| Synopsys/ Former ISE TCAD for Linux |
Required glibc version for Linux
System requirements for ISE TCAD Release 9.5:
- linux kernel 2.4.x
- glibc = 2.3.2The glibc version can be checked by using:
LINUX> /lib/libc.so.6 -v Look for:GNU C Library stable release version 2.3.2 Contact your Linux distributor for an upgraded version if required.
|
|
| Synopsys/ Former ISE TCAD for Alpha |
Required operating system patches for Tru64
ISE TCAD Release 9.5 requires a C++ run-time library. A redistribution kit can be downloaded. The minimum required version is CXXREDIST650.The ISE TCAD tool DEVISE is not available on this platform.
|
|
|
| Synopsys/ Former ISE TCAD for HP |
Required operating system patches for HP-UX 11I
SE TCAD Release 9.5 requires a C++ run-time library. The minimum version of the C++ run-time is the bundle C.03.33 as well as the patch for the C++ run-time library A.03.35.In addition, the following HP operating system patches may need to be installed. For problems with the pthread library: PHCO_21187, PHCO_23651, PHCO_26111, PHCO_26960, PHCO_28425, PHKL_17038, PHKL_18543, PHKL_20016, PHKL_27813, PHKL_27980For problems with the libcps library: PHSS_26913
|
|
|
| Mounting Rock Ridge CD-ROMs |
| Previously, mounting Rock Ridge CD-ROMs on HP required running PFS, which was very unstable. HP now provides patches to mount Rock Ridge CD-ROMs natively for HP-UX 11 and 11i. Patches for HP-UX 11.00: PHCO_28931, PHKL_23153, PHKL_28935
Patches for HP-UX 11.11: PHCO_25841, PHKL_26269, PHKL_28025 With these patches, the CD-ROMs can be mounted using the command: mount -orr DEVICENAME MOUNTPOINT The option -orr denotes mounting a Rock Ridge CD-ROM.
|
|
|
| Synopsys/ Former ISE TCAD tools cannot start from the Windows command shell |
| If the path to the Cygwin binaries is not part of the Windows path variable, ISE TCAD tools cannot start from the Windows command shell. In addition, some menu options in the GENESISe start menu may not work. Solution
Add the path to the Cygwin binaries to the Windows path variable. For a default installation, this path is \"C:\\cygwin\\bin".
|
|
|
|
